LNK500GN-TL
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | LinkSwitch® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 5.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G7 |
| Output Voltage | 5.6V |
| Input Voltage-Nom | 5.75V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.06mA |
| Input Voltage (Min) | 5.5V |
| Topology | Flyback |
| Output Current-Max | 0.4A |
| Frequency - Switching | 30kHz~42kHz |
| Input Voltage (Max) | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 80 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK500GN-TL Overview
In the package 8-SMD (7 Leads), Gull Wing , the ac to dc converter is embedded.The AC/DC power converter Tape & Reel (TR) is available for this product.In this case, the AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.There is 30kHz~42kHz switching frequency.As a result, it has had 7 terminations.A ac/dc converter with 8 pins is available.The pins of the ac-dc converter total to 8 .This AC to DC converter belongs to the LinkSwitch? family of manufacturers.There is 5.6V output voltage from this AC/DC converter.On the basis of a unique technique, the input voltage can be ensured to be 6V .An amount of current of 0.4A is the maximum that can be supplied to the ac to dc inverter.A voltage of 85V is the minimum supply voltage across the converter.There is a maximum supply voltage of 265V across the converter.
LNK500GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 30kHz~42kHz
With 8 pins
LNK500GN-TL Applications
There are a lot of Power Integrations LNK500GN-TL AC DC Converters applications.
- Switching AC-DC Adapter
- AC?DC USB chargers for Cameras
- Smartphones
- Switching AC-DC Charger
- Auxiliary Power Supplies
- RCC SMPS
- Standby power supplies for TV
- Lighting controls
- Networking
- Low power ac?dc Adapters for Chargers