LNK410LG
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 7-SSIP, 6 Leads, Exposed Pad, Formed Leads |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | LinkSwitch®-PH |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | MATTE TIN |
| Applications | Lighting |
| Frequency | 66kHz |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Max Supply Voltage | 725V |
| Max Output Voltage | 725V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current per Channel | 4.9A |
| Min Output Voltage | -300mV |
| Internal Switch(s) | Yes |
| Dimming | Triac |
| Switching Frequency | 66kHz |
| Voltage - Supply (Min) | 36V |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
LNK410LG Overview
To save board space, it uses the 7-SSIP, 6 Leads, Exposed Pad, Formed Leads package. LED drivers design with 1 outputs.We are using Through Hole as the mounting method.There is no doubt that this is a very efficient and reliable AC DC Offline Switcher.-40°C~150°C TJ is the operating temperature of the led driver.It is clear that Lighting will benefit from the program.Based on the frequency of 66kHz, it operates.A configuration of this chip is made up of 6 pins.The voltage supply can fail if it is below 36V.As you can see, it is mounted by Through Hole.A maximum supply voltage of 725V is acceptable.A minimal input voltage of 85V is required for it to operate.This electronic component can fully perform its functions when the switching frequency is kept at 66kHz.LED drivers deliver all their benefits with a maximum output current of 9A.Several applications make use of this LED driver from the LinkSwitch?-PH series.There shouldn't be an increase in output voltage over 725V.It maintains a minimum voltage of -300mV.
LNK410LG Features
Available in the 7-SSIP, 6 Leads, Exposed Pad, Formed Leads package
Operating temperature of -40°C~150°C TJ
Frequency of 66kHz
Switching frequency of 66kHz
LNK410LG Applications
There are a lot of Power Integrations LNK410LG LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
- Flicker-free LED Lighting using R1580N
- Medical surgery lighting
- Street lighting
- Down lights
- Architectural lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Scanners and Handy Terminals
- Panel lighting