LNK363PN
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1999 |
| Series | LinkSwitch®-XT |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | PURE MATTE TIN |
| Power Rating | 7.5W |
| Max Power Dissipation | 7.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 132kHz |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 250μA |
| Topology | Flyback |
| Output Current-Max | 0.4A |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 60 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 60% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK363PN Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.Through Hole mounts this AC/DC converter.The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.Total terminations are 7 .On this ac/dc converter, there are 8 pins.The pins of the ac-dc converter count up to 8 .Through Hole is the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the LinkSwitch?-XT manufacturer family.In this AC to DC transformer, there are 1 outputs to run.Its output voltage amounts to 5.8V .When operating at a frequency of 132kHz , AC to DC converter is capable of reaching high efficiency.An amount of current of 0.4A is the maximum that can be supplied to the ac to dc inverter.Here is the standard for REACH SVHC : No SVHC .A minimum voltage supply across the converter is 85V .There is a maximum voltage supply across the converter of 265V volts.This output uses Adjustable .
LNK363PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Type : Adjustable
LNK363PN Applications
There are a lot of Power Integrations LNK363PN AC DC Converters applications.
- LED Driver
- Vacuum Cleaner
- ATX/BTX Auxiliary Power
- Air Conditioning
- Adapter for ADSL
- Battery chargers for cellular phones
- Power Adaptors
- AC?DC USB chargers for Tablets
- Set -Top Box (STB) Power Supply
- Battery Chargers