LNK306DG
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-TN |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | REQUIRES AN AC SUPPLY OF 85 TO 256V |
| Max Power Dissipation | 12mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 250μA |
| Output Current | 360mA |
| Topology | Buck, Buck-Boost, Flyback |
| Frequency - Switching | 66kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 69% |
| Output Isolation | Non-Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
LNK306DG Overview
8-SOIC (0.154, 3.90mm Width), 7 Leads is the package in which the ac to dc converter is embedded.The ac dc converter is available in Tube case.In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.Switching frequency reaches 66kHz Hz.There are a total of 8 terminations in it.A ac/dc converter with 7 pins is available.Up to 8 pins are present on the ac-dc converter.Currently, it is acdc converter of the manufacturer family of LinkSwitch?-TN .There are 1 outputs to be run.Currently, the output current is set to 360mA .There is 12V output voltage from this AC/DC converter.Using this ACDC converter, REQUIRES AN AC SUPPLY OF 85 TO 256V is also accessible.This converter requires a minimum supply voltage of 85V volts.Across the converter, a maximum supply voltage of 265V may be applied.
LNK306DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 66kHz
With 7 pins
Output Current at 360mA
LNK306DG Applications
There are a lot of Power Integrations LNK306DG AC DC Converters applications.
- White goods
- Standby Power Supplies
- Power Adaptors
- Utility meters
- Cellular phone chargers
- AC/DC Adaptors/Chargers for Cell Phones
- Standby Power Supplies
- Adapter for ADSL
- Power tools
- AC?DC USB chargers for Tablets