LNK302PN
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 2.26799g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Series | LinkSwitch®-TN |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REQUIRES AN AC SUPPLY OF 85 TO 256V |
| Max Power Dissipation | 12mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 200μA |
| Output Current | 80mA |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 66kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 69% |
| Output Isolation | Non-Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK302PN Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube case, the ac dc converter is available.There is a mounting point for this AC/DC converter in the way of Through Hole .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.66kHz is the switching frequency.There are a total of 8 terminations.It contains 7 pins.The ac-dc converter has 8 pins.It are possible to mount thare ac dc converters by Through Hole .It belongs to the manufacturer family of LinkSwitch?-TN .In this AC to DC transformer, there are 1 outputs to run.We have set the output current to 80mA .In this AC to DC transformer, the output voltage is 12V .Here is the standard for REACH SVHC : No SVHC .The AC to DC converter input voltage can be powered under 265V .In addition to REQUIRES AN AC SUPPLY OF 85 TO 256V , this ACDC converter can also be used to determine REQUIRES AN AC SUPPLY OF 85 TO 256V .The AC to DC inverter may be operated with an input voltage less than 85V volts.A minimum voltage of 85V is required across the converter.The maximum supply voltage across the converter is 265V .The AC to DC power converter's input voltage (AC) should be below 265V .It is configured with a Adjustable output.
LNK302PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 66kHz
With 7 pins
Output Current at 80mA
Output Type : Adjustable
LNK302PN Applications
There are a lot of Power Integrations LNK302PN AC DC Converters applications.
- Charger
- AC?DC USB chargers for Cell Phones
- Remotely-controlled appliances
- Universal input AC/DC adapters (15W - 45W)
- Appliance Power Supplies
- Set Top Boxes (STB)
- Standby Power Supplies
- Power adapters for monitors
- Power tools fast chargers with trickle and on/off
- Adapter for ADSL