LNK302DN
| Parameters | |
|---|---|
| Min Supply Voltage (AC) | 85V |
| Height | 1.65mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch®-TN |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 80mW |
| Max Power Dissipation | 12mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 66kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 200μA |
| Output Current | 80mA |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Max Supply Voltage (AC) | 265V |
| Drain to Source Resistance | 48Ohm |
| Duty Cycle | 69% |
| Output Isolation | Non-Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
LNK302DN Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .There is a AC/DC power converter of Tube available.Surface Mount mounts this AC/DC converter.For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.Total terminations are 8 .In this ac/dc converter, there are 8 pins.Up to 8 pins are present on the ac-dc converter.Suitable mounting is provided by Surface Mount .It belongs to the family of LinkSwitch?-TN manufacturers.Running 1 outputs is available.The output current is set to 80mA .It produces a voltage of 700V .A high efficiency is achieved when operating at a frequency of 66kHz .You can read the standard for REACH SVHC at: No SVHC .An input voltage of 265V is available for powering the AC to DC converter.If the input voltage is less than 85V V, the AC to DC inverter can be used.This converter requires a minimum supply voltage of 85V volts.There is 265V maximum supply voltage across the converter.Input voltage (AC) should be below 265V .
LNK302DN Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
With 8 pins
Output Current at 80mA
LNK302DN Applications
There are a lot of Power Integrations LNK302DN AC DC Converters applications.
- MP3
- Power tools fast chargers with trickle and on/off
- Low power ac?dc Adapters for Chargers
- AC-DC Output Power Conversion Applications
- Power adapters for network devices
- Home appliances
- Battery chargers for media tablets
- Adapter for ADSL
- Standby and Auxiliary Power Supplies
- Battery Chargers