LMV794MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV794 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.3mA |
| Output Current | 60mA |
| Slew Rate | 35V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.35mV |
| Gain Bandwidth Product | 88MHz |
| Unity Gain BW-Nom | 88000 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 100μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | YES |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV794MM/NOPB Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a General Purpose type op amp. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. There is an input offset voltage of 1.35mV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using a supply current of 1.3mA , this buffer op amp will be able to operate. You should keep the voltage gain at 110dB for the time being. In total, there are 2 circuits on this buffer amplifier. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. This linear amplifier has a total of 1 elements. The instrumentation amplifier is packed in the form of TR.
LMV794MM/NOPB Features
8 Pins
supply voltage of 2.5V
110dB voltage gain
Output Type: Rail-to-Rail
LMV794MM/NOPB Applications
There are a lot of Texas Instruments LMV794MM/NOPB Instrumentational OP Amps applications.
- Power control
- Thermocouples
- Home audio systems
- Hand-held batteries
- Active probe
- Navigation
- Computer workstations
- Communication device
- Proportional counter tubes
- Multimedia playback equipment