LMV762MM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV762 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Nominal Supply Current | 450μA |
| Output Current | 40mA |
| Max Supply Current | 1.4mA |
| Propagation Delay | 225 ns |
| Quiescent Current | 700μA |
| Response Time | 225 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Input Offset Voltage (Vos) | 200μV |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 50pA |
| Input Bias Current | 50pA |
| Current - Quiescent (Max) | 700μA |
| Voltage - Input Offset (Max) | 0.2mV @ 5V |
| Current - Input Bias (Max) | 50pA @ 5V |
| CMRR, PSRR (Typ) | 100dB CMRR, 110dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV762MM Overview
To facilitate transportation, it comes packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Output type of this comparator is Push-Pull .Electronic comparator is shipped by Tape & Reel (TR) .You can find 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.When it comes to types, this comparator is a typical General Purpose .Electronic comparator has a total of 2 elements.There are 8 pins on this board.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.The comparator is equipped with 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LMV762 .The comparator displays a quiescent current of 700μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 450μA .An excess of current supply over 1.4mA could result in malfunction of the comparator.You can input a maximum current of 50pA into this device.A normal operation requires a voltage of 3V .
LMV762MM Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 700μA
LMV762MM Applications
There are a lot of Texas Instruments LMV762MM linear comparators applications.
- Window Comparators
- Window Comparators, Multivibrators
- Analog front end
- DC/DC and AC/DC power supplies
- Metering Systems
- Lithium ion battery monitoring
- Pulse, Squarewave, and Time Delay Generators
- High-Speed Sampling Circuits
- Zero-Crossing Detectors
- Ultra-Low Power Systems