LMV762MAX/NOPB
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Input Offset Voltage (Vos) | 200μV |
| Average Bias Current-Max (IIB) | 0.000005μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 5.5V |
| Screening Level | AEC-Q100 |
| Max Input Current | 50pA |
| Input Bias Current | 50pA |
| Current - Quiescent (Max) | 700μA |
| Voltage - Input Offset (Max) | 0.2mV @ 5V |
| Current - Input Bias (Max) | 50pA @ 5V |
| CMRR, PSRR (Typ) | 100dB CMRR, 110dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV762 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Nominal Supply Current | 450μA |
| Output Current | 40mA |
| Max Supply Current | 1.4mA |
| Propagation Delay | 225 ns |
| Quiescent Current | 700μA |
| Response Time | 120 ns |
LMV762MAX/NOPB Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Push-Pull output type for this comparator.The chip is packaged with Tape & Reel (TR) .The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.In general, the chip type can be classified as General Purpose .The total number of elements is 2 .As a result, it contains 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 8 pins.You can search LMV762 if you are looking for more pin-to-pin solutions.There is a quiescent current of 700μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 450μA .Current supply exceeding 1.4mA could cause disfunction of the compartator.Electronic comparator is possible to input a maximum of 50pA current into the device.A normal operation requires a voltage of 3V .This device is usually used in ADC circuits (packaged in TR ).
LMV762MAX/NOPB Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 700μA
LMV762MAX/NOPB Applications
There are a lot of Texas Instruments LMV762MAX/NOPB linear comparators applications.
- Zero-Crossing Detectors
- Infotainment and Clusters
- Zero-Crossing Detectors
- Mobile Communications
- Body Control Modules
- Self-diagnostics
- General-Purpose Portable Devices
- Threshold Detectors
- Battery management and protection
- High-Speed Differential Line Receiver