LMV7239QM7X/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMV7239 |
| Pin Count | 5 |
| Output Type | Open Drain, Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 95μA |
| Max Supply Current | 95μA |
| Propagation Delay | 75 ns |
| Quiescent Current | 95μA |
| Response Time | 75 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Input Offset Voltage (Vos) | 6mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 6V |
| Bias Current-Max (IIB) @25C | 0.6μA |
| Max Input Current | 600nA |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 8mV @ 5V |
| CMRR, PSRR (Typ) | 67dB CMRR, 85dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV7239QM7X/NOPB Overview
In order to make transportation easier, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .Output type of this comparator is Open Drain, Push-Pull .This package has been designed with Tape & Reel (TR) .There are 5 terminals on the comparator.The component belongs to the Comparator family of electrical components.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.In total, it contains 1 elements.The device is equipped with 5 pins.The recommended mounting method is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .There are 5 pins on the comparator.Try search LMV7239 to get more pin-to-pin solutions for your special needs.The comparator presents a quiescent current of 95μA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 95μA .If the current supply exceeds 95μA , the comparator could malfunction.Electronic comparator is possible to input a maximum of 600nA current into the device.Comparator electronics is a comparator part from the Automotive, AEC-Q100 series.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LMV7239QM7X/NOPB Features
Open Drain, Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 95μA
LMV7239QM7X/NOPB Applications
There are a lot of Texas Instruments LMV7239QM7X/NOPB linear comparators applications.
- Window Comparators
- Appliances
- Battery management and protection
- Threshold Detectors
- Current and voltage sensing
- Security Detection Systems
- Simple Analog-to-Digital Converters (ADCs)
- Handheld Instruments
- Industrial
- Point of load regulators