LMV7235M7X/NOPB
| Parameters | |
|---|---|
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV7235 |
| Pin Count | 5 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 95μA |
| Output Current | 55mA |
| Max Supply Current | 95μA |
| Propagation Delay | 62 ns |
| Quiescent Current | 95μA |
| Response Time | 68 ns |
| Common Mode Rejection Ratio | 67 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 6mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 400nA |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| Current - Input Bias (Max) | 0.4μA @ 5V |
| CMRR, PSRR (Typ) | 67dB CMRR, 85dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
LMV7235M7X/NOPB Overview
In order to facilitate transportation, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .There is a comparator of type Open-Drain, Rail-to-Rail output on this device.Ready for shipping in Tape & Reel (TR) package.There are 5 terminals on the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 2.7V voltage.In general, the chip type can be classified as General Purpose .Currently, it consists of only 1 elements.The device includes 5 pins.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .5 pins are present on the comparator.Alternatively, you may search for LMV7235 to find more pin-to-pin solutions for your specific needs.As a result, this comparator displays a quiescent current of 95μA .The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 95μA when using the device.An excess of current supply over 95μA could result in malfunction of the comparator.You can input a maximum current of 400nA into this device.Often found in ADC circuits, this device is packed in TR .
LMV7235M7X/NOPB Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 95μA
LMV7235M7X/NOPB Applications
There are a lot of Texas Instruments LMV7235M7X/NOPB linear comparators applications.
- Mobile Communications
- Infotainment & cluster
- Security Detection Systems
- General-Purpose, Low-Voltage Applications
- Building automation
- Zero-Crossing Detectors
- Laptop Computers
- Analog front end
- Battery management and protection
- Industrial