LMV7235M5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV7235 |
| Pin Count | 5 |
| Output Type | Open-Drain, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 95μA |
| Output Current | 55mA |
| Max Supply Current | 95μA |
| Propagation Delay | 62 ns |
| Quiescent Current | 52μA |
| Response Time | 68 ns |
| Common Mode Rejection Ratio | 67 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 6mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 400nA |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| Current - Input Bias (Max) | 0.4μA @ 5V |
| CMRR, PSRR (Typ) | 67dB CMRR, 85dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV7235M5/NOPB Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .A comparator with an output type of Open-Drain, Rail-to-Rail is being used.Electronic comparator is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 5 terminals of the comparator.The electrical component here belongs to the Comparator family.With a voltage of 2.7V supplied, the comparator is capable of performing a wide range of demanding tasks.This is a typical comparator of type General Purpose .Electronic comparator has a total of 1 elements.The device is equipped with 5 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.This comparator has 5 pins.If you require more pin-to-pin solutions, search LMV7235 for more options.The comparator displays a quiescent current of 52μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 95μA .A supply current exceeding 95μA may result in the comparator malfunctioning.You are allowed to input a maximum current of 400nA into the device.Comparator electronics is necessary to have a voltage of 5V for normal operation.The device is packaged in TR and is often used in ADC circuits.
LMV7235M5/NOPB Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 52μA
LMV7235M5/NOPB Applications
There are a lot of Texas Instruments LMV7235M5/NOPB linear comparators applications.
- Set Top Boxes
- Infotainment and Clusters
- Automatic Test Equipment
- Handheld Instruments
- Mobile Phones and Tablets
- Limit Comparators
- Motor drives
- Lithium ion battery monitoring
- High-Speed Sampling Circuits
- Building automation