LMR12010XMKE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMR12010 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Output Voltage | 17V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Operating Supply Voltage | 20V |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 1.5mA |
| Max Output Voltage | 17V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.6MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 800mV |
| Voltage - Output (Max) | 17V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMR12010XMKE/NOPB Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. This harley voltage regulator has 6 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. In order to save space, this harley voltage regulator is available in the SOT-23-6 Thin, TSOT-23-6 package. The voltage regulator is configured with 1 outputs. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. Surface Mount-mounting is compatible with this switching regulator. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. 1.6MHz is the switching frequency of this DC-DC switching regulator. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.8V. A regulator with this 260 peak reflow temperature is essentially indestructible. An input voltage of 5V is required for switching regulator operation. There is a DC/DC regulator in this family that belongs to the LMR12010 family. Voltage can be produced at 17V volts by voltage regulator. The switching regulator operation of the system is controlled by 6 pins. As a general rule, this voltage regulator 12v should keep its output voltage at least at 800mV. Switching regulator has a maximum output current of 1A A, which is sufficient to meet the requirements of operation. The maximal output voltage of 17V allows DC DC switching regulator to be operated easily. It provides the adjusting voltage regulator's maximal output voltage of 17V. As a member of the SIMPLE SWITCHER? family of DC/DC regulators, this part is prominent in many specifications. An input voltage of 20V is used to operate this harley voltage regulator. Voltage regulator consumes 1.5mA A of quiescent current without being affected by outside forces.
LMR12010XMKE/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 20V
LMR12010XMKE/NOPB Applications
There are a lot of Texas Instruments LMR12010XMKE/NOPB Voltage Regulators applications.
- Automation technology
- Photovoltaic power
- Program control systems
- Experimental setup
- Surge protection circuits
- Special machining machine tools
- Geothermal power
- Electric heating, lighting
- Textile machinery
- Computer monitoring equipment of building