LMP8645HVMKX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMP8645 |
| Pin Count | 6 |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.8mA |
| Max Supply Current | 2.8mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 260 kHz |
| Unity Gain BW-Nom | 990 kHz |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.7mV |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 860kHz |
| Programmable Power | NO |
| Wideband | NO |
| Voltage Gain-Min | 1 |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8645HVMKX/NOPB Overview
There is a SOT-23-6 Thin, TSOT-23-6 case in which the instrumentation amplifier is packaged. Current Sense-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It is estimated that there will be at least 6 terminations this year. A total of 6 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 6 pins. Op amp rates 1mV as input offset voltage. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 2.2mA, this op amp ic can operate. This op amp ic has 1 circuits. Op amp has total of 2 elements. This linear amplifier pack is based on the TR axis. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 1.
LMP8645HVMKX/NOPB Features
6 Pins
supply voltage of 5V
LMP8645HVMKX/NOPB Applications
There are a lot of Texas Instruments LMP8645HVMKX/NOPB Instrumentational OP Amps applications.
- Biopotential
- Logarithmic operation circuits
- Automotive sensors
- Video computer boards
- Addition operation circuits
- Home audio systems
- Test and measurement instruments
- Blood pressure sensors
- Mobile phone
- Integrator circuits