LMP8602MME/NOPB
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Series | LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMP8602 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Max Supply Current | 1.3mA |
| Slew Rate | 0.83V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.04pA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 60 kHz |
| Unity Gain BW-Nom | 60 kHz |
| Voltage Gain | 34.02dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage Gain-Nom | 50 |
| Common Mode Voltage-Max | 60V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
LMP8602MME/NOPB Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Current Sense-type. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. In more specific terms, this linear amplifier can be categoriInstrumentation Amplifiered as a Instrumentation Amplifier-type device. The buffer op amp includes 8 pins. Op amp rates 150μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 1.1mA . It is recommended to keep the voltage gain at 34.02dB at all times. Buffer op amp is equipped with 1 channels on the device. Op amp has total of 2 elements. The operating supply voltage of the buffer op amp is rated at 5V. For packing the buffer amplifier, the TR-axis is adopted. Instrumentation amplifiers are numbered by their LMP? series.
LMP8602MME/NOPB Features
8 Pins
34.02dB voltage gain
LMP8602MME/NOPB Applications
There are a lot of Texas Instruments LMP8602MME/NOPB Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Radiation thermometry transducers
- single/dual op amp sum and difference circuits
- Fast A/D and D/A converters
- High gain DC amplifier
- Thermocouples
- Mobile phone
- Hand-held batteries
- Large motor controllers
- ECG equipment