LMK03200ISQE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Type | Clock Conditioner |
| Subcategory | Clock Drivers |
| Packing Method | TR |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | LMK03200 |
| Output | LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 9 |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 86mA |
| Frequency (Max) | 1.296GHz |
| Input | LVCMOS, LVDS, LVPECL |
| Ratio - Input:Output | 1:8 |
| Max I(ol) | 0.0005 A |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.03 ns |
| Height | 800μm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 750μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMK03200ISQE/NOPB Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 48-WFQFN Exposed Pad package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are 48 terminations found in this file. This electronic frequency generator requires a voltage of 3.3V. In this clock generator, LVCMOS, LVDS, LVPECL is used as the input to the clock. For full access to the electronic component's capabilities, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 1.296GHz maximum. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Approximately 3.45V is the maximum supply voltage needed by this time clock generator. Clock PLL works with 3.15V~3.45V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. LVDS, LVPECL is designed for clock generator's output. A Clock Conditioner is a classification for the electronic part in question. Microprocessor-specific clock PLL with 48 bits. It is possible to find its related electronic parts by searching for the base part number LMK03200. A 48 pin is available on the PLL. Clock Drivers-type frequency generators are usually classified as this type. The output frequency can be amplified as high as possible with its 9 signal outputs. As a result of this digital clock generator, there is a low timing skew at 0.03 ns max. By operating at a frequency of 20MHz, frequency generator is able to achieve high efficiency. It is ideal for this electronic frequency generator to use the TR package.
LMK03200ISQE/NOPB Features
Available in the 48-WFQFN Exposed Pad
Supply voltage of 3.3V
LMK03200ISQE/NOPB Applications
There are a lot of Texas Instruments LMK03200ISQE/NOPB Clock Generators applications.
- Local oscillator source in receiver
- Digital circuits
- Frequency shifting decodes
- Tracking filters
- Infotainment systems
- Coherent carrier tracking
- Media broadcast servers
- Signal demodulation
- Local oscillators (LOs)
- Digital switching systems