LMH6639MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | VIP10™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMH6639 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Nominal Supply Current | 3.6mA |
| Output Current | 110mA |
| Current - Supply | 4.18mA |
| Slew Rate | 200V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 1.4μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 112mA |
| Input Offset Voltage (Vos) | 1.03mV |
| Bandwidth | 190MHz |
| Gain Bandwidth Product | 90MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 86000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 3.25μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.3mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 228MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Offset Current-Max (IIO) | 0.8μA |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6639MF/NOPB Overview
It is packaged in an SOT-23-6-case that protects the operational amplifiers from damage. Buffer amps of this type are called Voltage Feedback-types. Linear amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 6h termination of the year. Buffer amplifier has a total of 6 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 6 pins. The input offset voltage is 1.03mV. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 9V voltage. An buffer amplifier is packed in a TR-shape according to the design. To run supply current of buffer amplifier under 4.18mA. Buffer op amp series numbers are indicated by the VIP10?.
LMH6639MF/NOPB Features
6 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMH6639MF/NOPB Applications
There are a lot of Texas Instruments LMH6639MF/NOPB Instrumentational OP Amps applications.
- pH (acidity)
- Active probe
- Band-pass filter
- ECG equipment
- Oscilloscopes
- Car stereo
- Computer workstations
- Biopotential
- Video amplifiers
- Information processing