LMC7215IMX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMC7215 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Power Supplies | 2.7/5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 24 μs |
| Quiescent Current | 1μA |
| Response Time | 17000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2V~8V ±1V~4V |
| Input Offset Voltage (Vos) | 6mV |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 90dB PSRR |
| Current - Output (Typ) | 30mA |
| Length | 4.902mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMC7215IMX Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Push-Pull output type for this comparator.The part will be shipped by Tape & Reel (TR) .You can find 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.With a 2.7V voltage supply, the comparator can perform multiple demanding tasks.This is a typical comparator of type General Purpose .A total of 8 pins are included.Surface Mount universial mout for easy adapting.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.This comparator has 8 pins.You can search LMC7215 if you are looking for more pin-to-pin solutions.A quiescent current of 1μA is observed in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires a nominal supply current of 1μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1μA .A power supply of 2.7/5V is sufficient for the operation of the device.Comparator electronics follows that the voltage gain of the part is 140dB .
LMC7215IMX Features
Push-Pull output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 1μA
Voltage Gain: 140dB
LMC7215IMX Applications
There are a lot of Texas Instruments LMC7215IMX linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Mobile Communications
- Window Comparators
- Handheld Instruments
- Hand-Held Electronics
- Appliances
- General-Purpose Portable Devices
- Lithium ion battery monitoring
- Battery-Powered Electronics
- Limit Comparators