LMC6772AIMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMC6772 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 30mA |
| Max Supply Current | 20μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 20μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 16V |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC6772AIMX/NOPB Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type Open Drain is used for this comparator.The part will be shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.The type of the chip can be classified as General Purpose .This element consists of 2 elements in total.The device is equipped with 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LMC6772 .There is a quiescent current of 20μA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 20μA when using the device.If the current supply exceeds 20μA , the comparator might be damaged.Electronic comparator is possible to input up to 40 fA current into the device.From the voltage formula, the voltage gain of the part is 100dB .This device is usually used in ADC circuits (packaged in TR ).
LMC6772AIMX/NOPB Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 20μA
Voltage Gain: 100dB
LMC6772AIMX/NOPB Applications
There are a lot of Texas Instruments LMC6772AIMX/NOPB linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Wearable Devices
- General Purpose Low Voltage Applications
- Current and voltage sensing
- Alarm and Monitoring Circuits
- High-Speed Sampling Circuits
- Battery-Powered Electronics
- Window Comparators
- System control and monitoring
- Consumer Medical Electronics