LMC568CM/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | CMOS |
| Voltage - Supply | 2V~9V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 500kHz |
| Base Part Number | LMC568 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 9V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 2.4mA |
| Power Dissipation | 500mW |
| Max Supply Current | 2.4mA |
| Quiescent Current | 2.4mA |
| Frequency (Max) | 700kHz |
| Input | Clock |
| Ratio - Input:Output | 1:1 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Signal to Noise Ratio (SNR) | 65 dB |
| Divider/Multiplier | Yes/No |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMC568CM/NOPB Overview
This clock IC is packaged using the Tube method. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 260. 8 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 5V. This Clock PLL will be fed by Clock as its input. 700kHz is the maximal value for normal operation. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock generators can take up to 9V of power as a maximum supply voltageThe supply voltage (Vsup) should be kept above 2V for normal operation. As long as you provide 2V~9V supply voltage, it will work. Based on test statistics, ambient temperature should be set at -25°C~125°C. This electronic component is usually classified as a Clock Generator component. In this IC, a 8-bit frequency generator is designed specifically for use in microprocessors. According to the base part number, its related parts can be founded. There is an available 8 pin on the PLL. The maximum supply voltage that analog clock generator can handle is 5V. A PLL or Frequency Synthesis Circuits clock generator is essentially what this device is. 1 signal outputs allow for maximi1ation of output frequency. By operating at a frequency of 500kHz, RF synthesizer is able to reali500kHze high efficiency. To fully perform its function, time clock generator requires a supply current of 350μA. In this RF synthesizer operation, 2.4mA of current are supplied.
LMC568CM/NOPB Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V
Operating supply voltage of 5V
LMC568CM/NOPB Applications
There are a lot of Texas Instruments LMC568CM/NOPB Clock Generators applications.
- Microwave radio
- Ports
- Electronic countermeasures
- Signal modulation and demodulation
- Coherent carrier tracking
- Smartphones
- Telecommunication systems
- Frequency synthesis
- Cellular/4G
- Radar