LM7341MF/NOPB
| Parameters | |
|---|---|
| Supply Voltage | 2.7V |
| Base Part Number | LM7341 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 16V |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 700μA |
| Output Current | 13mA |
| Slew Rate | 1.9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 110nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~32V ±1.25V~16V |
| Output Current per Channel | 13mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 4.6MHz |
| Unity Gain BW-Nom | 4600 kHz |
| Voltage Gain | 100.83dB |
| Average Bias Current-Max (IIB) | 0.07μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 100kHz |
| Bias Current-Max (IIB) @25C | 0.08μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.4μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
LM7341MF/NOPB Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 5 terminations in the next few months. A total of 5 pins are located on this board. The linear amplifier should be run at 2.7V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 5 pins. In terms of input offset voltage, operational amplifier rates 200μV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using a supply current of 700μA , this buffer op amp will be able to operate. Keeping the voltage gain at 100.83dB is the best course of action. Op amp ic has 1 channels. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 16V. It is used TR to pack the op amps.
LM7341MF/NOPB Features
5 Pins
supply voltage of 2.7V
100.83dB voltage gain
Output Type: Rail-to-Rail
LM7341MF/NOPB Applications
There are a lot of Texas Instruments LM7341MF/NOPB Instrumentational OP Amps applications.
- Exponential operation circuits
- Proportional counter tubes
- Biopotential
- PDA
- Portable media players
- Logarithmic operation circuits
- Strain gauges
- Radar
- Signal transformation
- E-book readers