LM6511IMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LM6511 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.7V |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 500mW |
| Output Current | 100mA |
| Max Supply Current | -2mA |
| Quiescent Current | 3.5mA |
| Response Time | 180 ns |
| Common Mode Rejection Ratio | 72 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~30V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 92.04dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 130nA |
| Input Bias Current | 130nA |
| Voltage - Input Offset (Max) | 5mV @ 2.7V |
| Current - Input Bias (Max) | 0.13μA @ 2.7V |
| CMRR, PSRR (Typ) | 72dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM6511IMX/NOPB Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.A comparator with an output type of CMOS, Open-Collector, TTL is being used.The part will be shipped by Tape & Reel (TR) .There are8 terminals on the comparator.The chip belongs to Comparator .With a voltage of 2.7V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as General Purpose .There are a total of 1 elements in it.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching LM6511 .There is a quiescent current of 3.5mA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.The nominal supply current of the device should be 3.5mA for normal use.The compartator could be damaged if the current supply exceeds -2mA .The device can be operated with 2.7V power supplies.Electronic comparator is possible to input a maximum current of 130nA into the device.In accordance with the voltage formula, the part's voltage gain is 92.04dB .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LM6511IMX/NOPB Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3.5mA
Voltage Gain: 92.04dB
LM6511IMX/NOPB Applications
There are a lot of Texas Instruments LM6511IMX/NOPB linear comparators applications.
- Automotive
- Mobile Phones and Tablets
- Handheld Instruments
- High-Speed Differential Line Receiver
- Factory automation & control
- Security Detection Systems
- DC/DC and AC/DC power supplies
- Laptop Computers
- Multivibrators and High-Voltage Digital Logic Gates
- Set Top Boxes