LM6511IMX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LM6511 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.7V |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 500mW |
| Output Current | 100mA |
| Max Supply Current | -2mA |
| Quiescent Current | 3.5mA |
| Response Time | 180 ns |
| Common Mode Rejection Ratio | 72 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~30V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 92.04dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 130nA |
| Input Bias Current | 130nA |
| Voltage - Input Offset (Max) | 5mV @ 2.7V |
| Current - Input Bias (Max) | 0.13μA @ 2.7V |
| CMRR, PSRR (Typ) | 72dB CMRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM6511IMX Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Open-Collector, TTL output type for this comparator.This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.Electronic comparator is a part of Comparator family.In the presence of a 2.7V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Speaking of types, this is a typical General Purpose comparator.There are a total of 1 elements in it.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LM6511 .A quiescent current of 3.5mA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 3.5mA .An excess of current supply over -2mA could result in malfunction of the comparator.The device can be operated with 2.7V power supplies.Electronic comparator is possible to input a maximum of 130nA current into the device.The voltage gain of the part is indicated by 92.04dB in the voltage formula.
LM6511IMX Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3.5mA
Voltage Gain: 92.04dB
LM6511IMX Applications
There are a lot of Texas Instruments LM6511IMX linear comparators applications.
- RC Timers
- Simple Analog-to-Digital Converters (ADCs)
- Body Control Modules
- Set Top Boxes
- Zero-Crossing Detectors
- Window Comparators, Multivibrators
- Ultra-Low Power Systems
- Consumer Medical Electronics
- Battery management and protection
- Window Comparators