LM5085MY/NOPB
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5085 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 75V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 1.3mA |
| Control Features | Current Limit, Enable, On Time Control |
| Max Output Voltage | 75V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 75V |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.25V |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5085MY/NOPB Overview
With its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tape & Reel (TR) surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. 4.5V~75V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the Up to 1MHz position. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Current Limit, Enable, On Time Control is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING REGULATOR. The switching converters's terminal (s) are designed at DUAL . Various 8 terminations. DC switcher's voltage input is 48V. A search for "LM5085" will reveal other relevant dc to dc converter ics. Switching converter has a total of 8 pins. In particular, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 75V voltage based on test statistics. normally, the dc dc regulator's output current is 1.75A, which you should keep in mind when starting a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. 1MHz is the maximum frequency of this dc regulators. During dormancy, the dc switching uses 1.3mA. Since the dc switcher's maximum input voltage is 75V, the voltage must be regulated accordingly. Switching controller is necessary to have a supply voltage of 4.5V. There will be 10A current output from the dc switcher above 10A. Its datasheet indicates the switching converter can output a maximum of 75V volts. At its lowest voltage, the voltage controller does not produce less than 1.25V.
LM5085MY/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control
Max Duty Cycle: 100 %
LM5085MY/NOPB Applications
There are a lot of Texas Instruments LM5085MY/NOPB DC to DC converter applications.
- Cutting machine tools
- Surface processing equipment
- Mobile phones
- Printing
- Post equipment
- Game consoles
- Textile machinery
- Imported equipment
- Machining centers
- Injection molding machinery