LM5041ASD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 685kHz |
| Base Part Number | LM5041 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Quiescent Current | 3mA |
| Output Power | 500W |
| Control Features | Dead Time Control, Frequency Control, Soft Start |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5041ASD Overview
Capsuled in the 16-WFDFN Exposed Pad package, the switching controller suits most application needs. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 15V~90V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~125°C TJ. The switching controller is capable of switching at the 200kHz 600kHz position. dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Frequency Control, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of terminations with 16 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 48V volts. In addition to "LM5041", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. The dc to dc regulator can only accept a maximum input voltage of 90V. It's important to remember that the dc dc regulator's normaloutput current is 1.5A, so you should note it down when starting a new project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at 685kHz Hz. During dormancy, the dc switching uses 3mA.
LM5041ASD Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 685kHz
LM5041ASD Applications
There are a lot of Texas Instruments LM5041ASD DC to DC converter applications.
- Die casting equipment
- Adjustable voltage or current linear circuits
- Thermal power
- Various precision measuring instruments
- Laboratories
- Computer application technology
- Combined machine tools
- Product burn-in
- Series voltage regulation circuits
- Precision electronic equipment