LM5021NA-1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM5021 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 8.5V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2.5mA |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | 8V~30V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 8V |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 20V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5021NA-1 Overview
8-DIP (0.300, 7.62mm) is the package in which the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.It is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.As a result, the switching frequency reaches Up to 1MHz .Vcc/Vdd can be used within the range of 8V~30V supply voltage.In total, it has 8 terminations.The ac/dc converter has a total of 8 pins.The pins of the ac-dc converter count up to 8 .Through Hole is a suitable mounting point for the ac dc converters.A similar acdc converter can be searched by using the LM5021 family.There are 1 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .Current output is set to 700mA .The voltage output by this AC/DC converter is 8.5V .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 30V .
LM5021NA-1 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 700mA
LM5021NA-1 Applications
There are a lot of Texas Instruments LM5021NA-1 AC DC Converters applications.
- Adapters for Handheld Electronics
- Small off-line low voltage power supplies
- IoT Applications
- Industrial controls
- USB type-c v1.2 chargers with optional VDM
- Standby Power Supplies
- AC/DC Adaptors/Chargers for PDAs
- Standby power supplies for VCR
- Tablets
- Standby Power for General Off-Line Applications