LM5020MMX-1
| Parameters | |
|---|---|
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 18ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 80 % |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5020 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Quiescent Current | 2mA |
| Output Power | 300W |
| Control Features | Frequency Control, Soft Start |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~630kHz |
LM5020MMX-1 Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of handling Transistor Driver dc switching's outputs (s). 8V~15V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~125°C TJ rating. This switching controller can switch at 200kHz~630kHz. Surface Mount makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Frequency Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . 8 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 48V. LM5020 can be used to locate other relevant dc to dc converter ics. 10 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 7V. The dc to dc regulator is limited to 90V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. Voltage regulator dc to dc is designed to operate at 80 % duty cycle during power-ups and power-downs to ensure reliability. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator's maximum frequency is 1MHz. As long as the dc switching is in a dormant state, it utilizes 2mA.
LM5020MMX-1 Features
Transistor Driver Outputs
Switching Frequency: 200kHz~630kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
LM5020MMX-1 Applications
There are a lot of Texas Instruments LM5020MMX-1 DC to DC converter applications.
- Large fire protection systems
- Analog precision reference circuits
- Current source circuits
- Energy management systems
- Industrial robots
- Surface processing equipment
- Various precision measuring instruments
- Wind power
- Program control systems
- Serial communication converter