LM4862M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | Boomer® |
| JESD-609 Code | e3 |
| Feature | Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM4862 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 3.6mA |
| Quiescent Current | 6mA |
| Output Power | 825mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Max Output Power | 825mW |
| Max Output Power x Channels @ Load | 825mW x 1 @ 8 Ω |
| Number of Amplifiers | 1 |
| Load Impedance | 8Ohm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM4862M/NOPB Overview
I have embedded this device in 8-SOIC (0.154, 3.90mm Width) .Amp parts is recommended that the chip be packaged in a Tube case.This output is configured with 1-Channel (Mono) .In this case, it is an electrical device of type Class AB .In a computer or other communication device, there are two pronged contacts called 8 pins.In this case, the electronic part is mounted in the way of Surface Mount .There is 2.7V~5.5V voltage supply to this electrical device.Currently, the device has only 1 channels.Shutdown, Thermal Protection can be ensured when operating.Ideally, the operating temperature should not exceed -40°C~85°C TA .In addition, it is equipped with 8 pins.Amp parts is part of Audio/Video Amplifiers .The LM4862 family contains this object.This electronic part is mounted in the way of Surface Mount .This electronic component's maximum output power is 825mW kWh per hour.A normal operation is dependent upon the supply voltage (Vsup) remaining above 2.7V .There is a supply type of Single for this electronic part.Boomer? is the series number for this electronic part.Without external influences, it consumes 6mA of quiescent current.Among the 1 amplifiers in the world, these devices enhance a signal's voltage, current, or power.
LM4862M/NOPB Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
LM4862 family
825mW kWh per hour
Boomer? series
LM4862M/NOPB Applications
There are a lot of Texas Instruments LM4862M/NOPB audio amplifiers applications.
- High gain DC amplifier
- Instrumentation
- Switching amplifier
- Automotive sensors
- Test and measurement instruments
- Test equipment
- Information processing
- Active probe
- High/low-pass filter circuit
- Portable electronic products powered by batteries