LM4675SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Boomer®, PowerWise® |
| JESD-609 Code | e3 |
| Feature | Depop, Differential Inputs, PWM, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class D |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.4V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM4675 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.8mA |
| Quiescent Current | 2.8mA |
| Output Power | 2.65W |
| Common Mode Rejection Ratio | 80 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Max Output Power | 2.7W |
| Max Output Power x Channels @ Load | 2.7W x 1 @ 4 Ω |
| Load Impedance | 8Ohm |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM4675SD/NOPB Overview
8-WFDFN Exposed Pad contains an embedded device.Ideally, the chip should be packaged in a Tape & Reel (TR) case.In addition, there are 8 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.In the configuration, 1-Channel (Mono) is used as the output.Amp parts is an electrical device of type Class D .The 8 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Electronic parts are mounted in the way of Surface Mount .There is 2.4V~5.5V supply voltage for this electrical device.Currently, the device has only 1 channels.Amp parts is possible to operate wAmp partsh Depop, Differential Inputs, PWM, Short-Circuit and Thermal Protection, Shutdown .Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.There are 8 pins present on this device.As part of Audio/Video Amplifiers , this part is included.Amp parts is included in the LM4675 family.There is an electronic part in the way of Surface Mount .This electronic part has a maximum output power of 2.7W kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 2.4V .Amp parts is an electronic part wAmp partsh a supply type of Single .Boomer?, PowerWise? is the series number for this electronic part.Despite being unaffected by external factors, it consumes 2.8mA of quiescent current.
LM4675SD/NOPB Features
8-WFDFN Exposed Pad package
8 pin count
LM4675 family
2.7W kWh per hour
Boomer?, PowerWise? series
LM4675SD/NOPB Applications
There are a lot of Texas Instruments LM4675SD/NOPB audio amplifiers applications.
- Video and image computer boards
- Switching amplifier
- Broadcasting
- Logarithmic and exponential operation circuits
- Weak signal detection
- ECG equipment
- Oscilloscopes
- High speed sample
- Test equipment
- Automotive sensors