LM393DRG3
| Parameters | |
|---|---|
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 800μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
LM393DRG3 Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, MOS, Open-Drain, TTL is being used.The part will be shipped by Tape & Reel (TR) .The comparator has 8 terminals.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.When it comes to types, this comparator is a typical Differential .There are a total of 2 elements in it.There are 8 pins on this board.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.Electronic comparator has 8 pins.You may wish to search LM393 for more solutions that address your specific needs.In this comparator, the quiescent current is 2.5mA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 1mA when using the device.If the current supply exceeds 800μA , the comparator might be damaged.The device can be operated with 5V power supplies.You are allowed to input a maximum current of 250nA into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .Packed in TR , this device is for general uses (often in ADC circuits).
LM393DRG3 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393DRG3 Applications
There are a lot of Texas Instruments LM393DRG3 linear comparators applications.
- Wearable Devices
- Infotainment & cluster
- Battery-Powered Electronics
- General-Purpose, Low-Voltage Applications
- Body Control Modules
- Factory automation & control
- Zero-Crossing Detectors
- DC/DC and AC/DC power supplies
- High-Speed Differential Line Receiver
- RC Timers