LM393AP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Power Supplies | 5/30V |
| Number of Circuits | 2 |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 20mA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393AP Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .There is a CMOS, MOS, Open-Drain, TTL output type for this comparator.The part will be shipped by Tube .There are 8 terminals on the comparator.Other Comparator like the device play a important role in the industry.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.It's a typical Differential comparator.The device contains 8 pins.The recommended mounting type is Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator is equipped with 8 pins.In order to find a solution that meets your specific needs, search LM393 for more pin-to-pin solutions.In this comparator, the quiescent current is 2.5mA .A Through Hole is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 1mA in order to use the device normally.If the current supply exceeds 500μA , the comparator might be damaged.There is sufficient power to run the device from 5/30V power supplies.You can input a maximum current of 250nA into this device.According to the voltage formula, the part has a voltage gain of 106.02dB .
LM393AP Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393AP Applications
There are a lot of Texas Instruments LM393AP linear comparators applications.
- Analog front end
- Lithium ion battery monitoring
- Battery-Powered Electronics
- Battery management and protection
- High-Speed Differential Line Receiver
- Window Comparators, Multivibrators
- Power management
- Factory automation & control
- Wireless Base Stations
- Ultra-Low Power Systems