LM393ADR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5/30V |
| Nominal Supply Current | 600μA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | -25nA |
| Max Junction Temperature (Tj) | 150°C |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Ambient Temperature Range High | 70°C |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393ADR Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.Output type of this comparator is CMOS, MOS, Open-Drain, TTL .Electronic comparator is shipped by Cut Tape (CT) .You can find 8 terminals of the comparator.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as Differential .The total number of elements is 2 .The device contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search LM393 for more pin-to-pin solutions.In this comparator, the quiescent current is 2.5mA .There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 600μA .A supply current exceeding 500μA may result in the comparator malfunctioning.5/30V power supplies are enough to run the device.You can input a maximum current of 250nA into this device.From the voltage formula, the voltage gain of the part is 106.02dB .Packed in TR , this device is for general uses (often in ADC circuits).
LM393ADR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393ADR Applications
There are a lot of Texas Instruments LM393ADR linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Set Top Boxes
- Wireless Base Stations
- Pulse, Squarewave, and Time Delay Generators
- Simple Analog-to-Digital Converters (ADCs)
- Window Comparators
- High-Speed Sampling Circuits
- Battery-Powered Electronics
- Portable and Battery-Powered Systems
- Wearable Devices