LM393AD
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Power Supplies | 5/30V |
| Number of Circuits | 2 |
| Nominal Supply Current | 600μA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 9V |
| Input Bias Current | -25nA |
| Max Junction Temperature (Tj) | 150°C |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Ambient Temperature Range High | 70°C |
| Current - Output (Typ) | 20mA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM393AD Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, MOS, Open-Drain, TTL .As a result, it is designed with Tube package.The device is designed with 8 terminations.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.This is a typical comparator of type Differential .The board includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There are 8 pins on the comparator.Try search LM393 to get more pin-to-pin solutions for your special needs.There is 2.5mA current flowing in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 600μA when using the device.Current supply exceeding 500μA could cause disfunction of the compartator.The device can be operated with 5/30V power supplies.In accordance with the voltage formula, the part's voltage gain is 106.02dB .
LM393AD Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393AD Applications
There are a lot of Texas Instruments LM393AD linear comparators applications.
- Portable and Battery-Powered Systems
- General-Purpose, Low-Voltage Applications
- Automotive
- Handheld Instruments
- Current and voltage sensing
- Battery-Powered Electronics
- High-Speed Sampling Circuits
- Hand-Held Electronics
- Point of load regulators
- Appliances