LM392DGKTG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Amplifier, Comparator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | Transducer Amplifier |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM392 |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Nominal Supply Current | 2mA |
| Output Current | 40mA |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 65 dB |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Average Bias Current-Max (IIB) | 0.4μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Min Dual Supply Voltage | 1.5V |
| Programmable Power | NO |
| Input Bias Current | 400nA |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM392DGKTG4 Overview
In a Tape & Reel (TR) package, it is housed.It's an excellent Amplifier, Comparator at an excellent price.It was sent with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The part is mounted in the Surface Mount.It finds its uses in Transducer Amplifier mainly.Part number LM392 corresponds to the base part number of the device.There are 2 functions here which are used for accessing high performance for amplification purposes.There are total of 8 terminals, each of which has a different function.During the peak relow process, the iron temperature must be controlled under 260 when the peak relow for the part is being carried out.As a whole, there are a total of six 8 pins on the part.It is recommended to use a supply voltage of 5V in order to fully run this amplifier.This is a 8-pin amplifier that can be used for any custom application you may have.Having a very low temperature of as low as 0°C is the lowest that a device can operate at.The fact that this part is capable of running at temperatures as high as 70°C is impressive.Surface Mount offers greater design flexibility with this product.In addition to being able to amplify just like other high-quality Operational Amplifier, it also has a fascinating reverb system.In order to achieve the best performance on this video processing device, 2 channels have been combined.16V can be used to supply this device.
LM392DGKTG4 Features
LM392DGKTG4 Applications
There are a lot of Texas Instruments LM392DGKTG4 Special Purpose Amplifiers applications.
- Oscilloscopes
- Test equipment
- Fast A/D and D/A converters, video amplifiers
- Industrial applications including automation
- Proportional counter tubes
- E-book readers
- Band-pass filter
- Communication
- Integrator and differentiator circuits
- Displayers for aircraft and air transportation control systems