LM386N-1
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.25W |
| Technology | BIPOLAR |
| Voltage - Supply | 4V~12V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM386 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 1 |
| Nominal Supply Current | 4mA |
| Power Dissipation | 1.25W |
| Quiescent Current | 8mA |
| Output Power | 325mW |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 300 kHz |
| Gain Bandwidth Product | 300 kHz |
| Voltage Gain | 46dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Max Output Power | 325mW |
| Input Bias Current | 250nA |
| Max Output Power x Channels @ Load | 325mW x 1 @ 8 Ω |
| Harmonic Distortion | 10% |
| Number of Amplifiers | 1 |
| Load Impedance | 8Ohm |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM386N-1 Overview
The device is embedded in 8-DIP (0.300, 7.62mm) .This device is packaged in the way of Tube .Amp parts is configured wAmp partsh an output of 1-Channel (Mono) .There is Class AB type of electrical device associated with this device.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. Amp parts is mounted in front of Through Hole .The supply voltage of this electrical device is 4V~12V .1 channels are present on the device.Ideally, the operating temperature should not exceed 0°C~70°C TA .A total of 8 pins are present on the device.Audio/Video Amplifiers contains it.Amp parts is included in the LM386 family.In this electronic part, the output power is a maximum of 325mW kWh per hour.A normal operation requires a supply voltage (Vsup) above 4V .Electronic parts with Single supply types are available.There is 8mA external influence on the consumption of quiescent current: it consumes 8mA of quiescent current. 1 amplifiers are electronic devices that increase a signal's voltage, current, or power.
LM386N-1 Features
8-DIP (0.300, 7.62mm) package
8 pin count
LM386 family
325mW kWh per hour
LM386N-1 Applications
There are a lot of Texas Instruments LM386N-1 audio amplifiers applications.
- Proportional operation circuits
- Addition and subtraction operation circuits
- Industrial control system
- Communication
- Radar
- Semiconductor detectors
- Vehicle electronics
- Power transmission
- Test and measurement instruments
- Professional videography