LM3495MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Base Part Number | LM3495 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 5A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 2.9V~18V |
| Quiescent Current | 1.8mA |
| Control Features | Current Limit, Frequency Control, Tracking |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~1.5MHz |
| Max Input Voltage | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Input Current | 1.8mA |
| Duty Cycle (Max) | 96% |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM3495MTC Overview
With a 16-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. Voltages 2.9V~18V are the dc control's supply voltage and operating voltage, respectively. Suitable for a -40°C~125°C TJ dc switcher. A switching controller such as this can switch at a value of 200kHz~1.5MHz . A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Frequency Control, Tracking. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 16 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. Other relevant dc to dc converter ics will be returned if you search "LM3495". 16 pins are present on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 5.5V. In most cases, the dc dc regulator's output current is 10A. This information should be noted when you begin working with the component. DC switcher's Surface Mount qualifies it for most applications and prototypes. A frequency of 500kHz is set for the switching controller. Dormant dc switchings use 1.8mA. Because the dc switcher's maximum input voltage is 18V users must limit the voltage accordingly. There will be 5A current output from the dc switcher above 5A. Depending on the datasheet, the switching converter can output 5.5V volts at its peak. An input flow rate of 1.8mA could satisfy the switching converter 's operation requirements.
LM3495MTC Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1.5MHz
Current Limit, Frequency Control, Tracking
PULSE WIDTH MODULATION
Frequency: 500kHz
LM3495MTC Applications
There are a lot of Texas Instruments LM3495MTC DC to DC converter applications.
- Medical equipment
- Power supplies of electronic gadgets
- Ball screw pair
- Program control systems
- seismic instrument power circuits
- Network technology
- USB circuits
- Plate bending machines
- Automatic testing equipment
- Various precision measuring detectors