LM3431AMH/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Max Power Dissipation | 3.1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM3431 |
| Number of Outputs | 3 |
| Output Voltage | 40V |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Power Dissipation | 3.1W |
| Output Current | 200mA |
| Max Supply Current | 4.85mA |
| Quiescent Current | 4mA |
| Topology | Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | No |
| High Level Output Current | 20mA |
| Low Level Output Current | 8mA |
| Dimming | Analog, PWM |
| Switching Frequency | 1MHz |
| Voltage - Supply (Min) | 4.5V |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3431AMH/NOPB Overview
To save board space, it uses the 28-PowerTSSOP (0.173, 4.40mm Width) package. In LED drivers, the outputs are all set to 3.It adopts the way of Surface Mount for mounting.With high efficiency and reliable performance, it emerges as a DC DC Controller.It is able to work normally at the operating temperature of -40°C~125°C TJ.A number of benefits are available to Backlight.The LED light driver is configured with a base of 0 pins.Undetermined failures can occur if the voltage supply is below 4.5V.The device has been mounted on the Surface Mount.This LED driver has the part number LM3431.Ideally, the supply voltage should be 36V.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 4.5V.When the maximum supply current is less than 4.85mA, this device is able to provide high efficiency.There is no current available to supply to the load.This electronic component can fully perform when the switching frequency is 1MHz.The consumption of current is 4mAin the absence of external factors.This device produces a voltage of 40V as its output.
LM3431AMH/NOPB Features
Available in the 28-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Switching frequency of 1MHz
Output voltage of 40V
LM3431AMH/NOPB Applications
There are a lot of Texas Instruments LM3431AMH/NOPB LED Driver ICs applications.
- Stage Lighting and Signage
- Panel lighting
- Auxiliary lights for on-vehicle cameras
- Other Electronic Devices
- Down lights
- High-end retail lighting
- Flicker-free LED Lighting using R1580N
- Down lighting
- Refrigeration lighting
- Replacement lamps