LM339NSR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Manufacturer Package Identifier | NS (R-PDSO-G) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM339NSR Overview
The product is packaged in 14-SOIC (0.209, 5.30mm Width) to facilitate transportation.The comparator has an output type of CMOS, MOS, Open-Collector, TTL .As a result, it is designed with Tape & Reel (TR) package.The device is designed with 14 terminations.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .The type of the chip can be classified as Differential .In total, it contains 4 elements.Electronic comparator has 14 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator has a pin count of 14 .If you require more pin-to-pin solutions, search LM339 for more options.There is a quiescent current of 2.5mA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current of the device be 500μA .If the current supply exceeds 500μA , the comparator might be damaged.There is sufficient power to run the device from 5V power supplies.You can input a maximum current of 250nA into this device.Based on the voltage formula, the voltage gain of the part is 106.02dB .This device is usually used in ADC circuits (packaged in TR ).
LM339NSR Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339NSR Applications
There are a lot of Texas Instruments LM339NSR linear comparators applications.
- Window Comparators
- High-Speed Differential Line Receiver
- Window Comparators, Multivibrators
- Appliances
- Mobile Phones and Tablets
- Wide Range VCO; MOS Clock Timers
- Ultra-Low Power Systems
- DC/DC and AC/DC power supplies
- Current and voltage sensing
- Hand-Held Electronics