LM339DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Nominal Supply Voltage (DC) | 5V |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM339DR2G Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .There is a CMOS, Open-Collector, TTL output type for this comparator.The part is shipped by Cut Tape (CT) .14 terminals are found on the comparator.The chip belongs to Comparator .In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical General Purpose comparator.There are a total of 4 elements in it.Electronic comparator includes 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.14 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM339 .The comparator presents a quiescent current of 2.5mA volts.Normal use of the device should require a nominal supply current of 2mA .If the current supply exceeds 2mA , the comparator might be damaged.The device can be powered by 5V power supplies.Electronic comparator is possible to input a maximum current of 250nA into the device.Based on the voltage formula, the voltage gain of the part is 106.02dB .
LM339DR2G Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM339DR2G Applications
There are a lot of ON Semiconductor LM339DR2G linear comparators applications.
- Lithium ion battery monitoring
- Current and voltage sensing
- Power management
- Handheld Instruments
- Pulse, Squarewave, and Time Delay Generators
- Zero-Crossing Detectors
- Limit Comparators
- Alarm and Monitoring Circuits
- Battery-Powered Electronics
- Mobile Phones and Tablets