LM3150MH/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO HAS ADJUSTABLE OUTPUT VOLTAGE DOWN TO 0.6V; ALSO OPERATES IN VOLTAGE MODE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM3150 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 18V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | 6V~42V |
| Quiescent Current | 3.5mA |
| Control Features | Current Limit, Enable, On Time Control, Soft Start |
| Topology | Buck |
| Min Input Voltage | 6V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 42V |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3150MH/NOPB Overview
With its 14-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 1. An enclosure of Tube is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 6V~42V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to Up to 1MHz. dc dc regulators can be carried out with Surface Mount. Current Limit, Enable, On Time Control, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. There are many different types of terminations for 14. This dc dc converter ic uses a variety of control techniques, including HYSTERETIC CURRENT MODE. DC switcher's voltage input of 18V. You can find other relevant dc to dc converter ics by searching "LM3150". There are only 14 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 600mV voltage according to the test statistics. normally, the dc dc regulator's output current is 12A, which you should keep in mind when starting a project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulators have a maximum frequency of 1MHz. To better satisfy the need, DC to DC voltage regulator has a value of ALSO HAS ADJUSTABLE OUTPUT VOLTAGE DOWN TO 0.6V; ALSO OPERATES IN VOLTAGE MODE. A dc to dc voltage regulator in the SIMPLE SWITCHER? series, it belongs to this family. In dormant mode, 3.5mA is used. Since the dc switcher's maximum input voltage is 42V, the voltage must be regulated accordingly. Voltage 6V must be supplied. voltage controllers with a minimum voltage output of 600mV cannot operate.
LM3150MH/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control, Soft Start
HYSTERETIC CURRENT MODE
ALSO HAS ADJUSTABLE OUTPUT VOLTAGE DOWN TO 0.6V; ALSO OPERATES IN VOLTAGE MODE
LM3150MH/NOPB Applications
There are a lot of Texas Instruments LM3150MH/NOPB DC to DC converter applications.
- Digital video recorders
- Industrial robots
- Overvoltage protection circuits in TV sets
- CMM
- Arc suppression circuits
- Surface processing equipment
- Sensitive electronic devices
- Various CNC machine tools
- Telecommunications equipment
- Scientific testing