LM311DT
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM311 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 7.5mA |
| Power Dissipation | 710mW |
| Output Current | 50mA |
| Max Supply Current | 6mA |
| Propagation Delay | 200 ns |
| Quiescent Current | 7.5mA |
| Turn On Delay Time | 200 ns |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±2.5V~15V |
| Output Current per Channel | 200pA |
| Input Offset Voltage (Vos) | 7.5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7.5mV @ ±15V |
| Current - Input Bias (Max) | 0.25μA @ ±15V |
| Height | 1.65mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM311DT Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output.The chip is packaged with Tape & Reel (TR) .8 terminals are found on the comparator.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 15V voltage.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 1 elements in total.There are 8 pins on this board.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.Electronic comparator has 8 pins.Try search LM311 to get more pin-to-pin solutions for your special needs.As a result, this comparator displays a quiescent current of 7.5mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 7.5mA .If the current supply exceeds 6mA , the comparator could malfunction.Electronic comparator is possible to input a maximum current of 250nA into the device.A voltage gain of 106.02dB can be determined from the voltage formula for the part.The operating supply voltage for normal operation should be 15V .
LM311DT Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 7.5mA
Voltage Gain: 106.02dB
LM311DT Applications
There are a lot of STMicroelectronics LM311DT linear comparators applications.
- DC/DC and AC/DC power supplies
- Lithium ion battery monitoring
- Alarm and Monitoring Circuits
- Wearable Devices
- Point of load regulators
- Security Detection Systems
- Window Comparators
- Wide Range VCO; MOS Clock Timers
- System control and monitoring
- Laptop Computers