LM293DR2
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Cut Tape (CT) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM293 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Power Supplies | 5V |
| Temperature Grade | OTHER |
| Number of Channels | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 570mW |
| Output Current | 100pA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.5 μs |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1V |
| Input Bias Current | 250nA |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM293DR2 Overview
In order to facilitate transportation, it is packaged in SOIC .There is a TTL output type for this comparator.Ready for shipping in Cut Tape (CT) package.There are8 terminals on the comparator.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical General Purpose comparator.Electronic comparator has 8 pins.This comparator has 8 pins.You can search LM293 if you are looking for more pin-to-pin solutions.A quiescent current of 2.5mA is displayed by this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1mA .The device can be operated with 5V power supplies.A voltage gain of 106.02dB can be determined from the voltage formula for the part.Comparator electronics is not recommended to maintain a temperature above 85°C .Comparator electronics cannot be operated at temperatures below -25°C .In the comparator, the maximum supply voltage is 36V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 2V .2 channels cooperate together to maintain the output quality.
LM293DR2 Features
TTL output capability
General Purpose IC
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293DR2 Applications
There are a lot of ON Semiconductor LM293DR2 linear comparators applications.
- Mobile Phones and Tablets
- Wide Range VCO; MOS Clock Timers
- Wearable Devices
- Point of load regulators
- General-Purpose, Low-Voltage Applications
- Portable Battery Monitoring
- Metering Systems
- Body Control Modules
- Infotainment & cluster
- Current and voltage sensing