LM293DMR2G
| Parameters | |
|---|---|
| Type | General Purpose |
| Terminal Finish | Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM293 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 570mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 9 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
LM293DMR2G Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.This comparator is of the CMOS, DTL, ECL, MOS, Open-Collector, TTL output type.This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .This is a 2 element comparator.The board includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -25°C~85°C .The comparator is equipped with 8 pins.You may wish to search LM293 for more solutions that address your specific needs.This comparator presents a quiescent current of 2.5mA .Normal operation of the device requires 1mA supply current.If the current supply exceeds 1mA , the comparator could malfunction.A power supply of 5V is sufficient for the operation of the device.You are allowed to input a maximum current of 250nA into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .
LM293DMR2G Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293DMR2G Applications
There are a lot of ON Semiconductor LM293DMR2G linear comparators applications.
- Battery-Powered Electronics
- Appliances
- Metering Systems
- Mobile Phones and Tablets
- General Purpose Low Voltage Applications
- Body Control Modules
- Hand-Held Electronics
- Lithium ion battery monitoring
- Handheld Instruments
- Ultra-Low Power Systems