LM2903VQPWR
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 34.50137mg |
| Operating Temperature | -40°C~125°C |
LM2903VQPWR Overview
The product is packaged in 8-TSSOP (0.173, 4.40mm Width) for ease of transportation.A comparator with a CMOS, MOS, Open-Drain, TTL output is used here.Ready for shipping in Tape & Reel (TR) package.There are8 terminals on the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as Differential .This element consists of 2 elements in total.The device is equipped with 8 pins.The recommended mounting type is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .Electronic comparator has 8 pins.You can find more pin-to-pin solutions by searching LM2903 .A quiescent current of 2.5mA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 500μA .If the current supply exceeds 500μA , the comparator could malfunction.The device can be run with 5V power supplies.You can input a maximum current of 250nA into this device.Comparator electronics follows that the voltage gain of the part is 100dB .In this case, the part is from the Automotive, AEC-Q100 comparator series.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LM2903VQPWR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903VQPWR Applications
There are a lot of Texas Instruments LM2903VQPWR linear comparators applications.
- Consumer Medical Electronics
- Battery-Powered Electronics
- Notebooks and PDAs
- Security Detection Systems
- Industrial
- High-Speed Sampling Circuits
- Automotive
- Limit Comparators
- Analog front end
- Automatic Test Equipment