LM2901QPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | -5mA |
| Output Current | 20mA |
| Max Supply Current | -5mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901QPWRG4Q1 Overview
A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, MOS, Open-Collector, TTL output on this device.This chip is designed with the Tape & Reel (TR) package.The comparator has 14 terminals.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In terms of type, this is a typical Differential comparator.A total of 4 elements can be found in it.As a result, it contains 14 pins.The recommended mounting method is Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 14 .Try search LM2901 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 2.5mA .There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be -5mA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds -5mA .The device can be powered by 5V power supplies.Electronic comparator is possible to input a maximum of 250nA current into the device.In accordance with the voltage formula, the part's voltage gain is 100dB .Comparator electronics comes from the series of Automotive, AEC-Q100 comparator parts.The device is packaged in TR and is often used in ADC circuits.
LM2901QPWRG4Q1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901QPWRG4Q1 Applications
There are a lot of Texas Instruments LM2901QPWRG4Q1 linear comparators applications.
- High-Speed Sampling Circuits
- Zero-Crossing Detectors
- Portable Battery Monitoring
- Power management
- Ultra-Low Power Systems
- Mobile Phones and Tablets
- Current and voltage sensing
- Battery-Powered Electronics
- Pulse, Squarewave, and Time Delay Generators
- Security Detection Systems