LM2901MX
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Output Current | 16nA |
| Quiescent Current | 2mA |
| Supply Current-Max | 2.5mA |
| Response Time | 1300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 250nA @ 5V |
| Current - Output (Typ) | 16nA @ 5V |
| Height Seated (Max) | 1.65mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
LM2901MX Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has a CMOS, MOS, Open-Collector, TTL output.The chip is packaged with Tape & Reel (TR) .There are14 terminals on the comparator.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 4 elements in total.The device contains 14 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 14 pins.You may wish to search LM2901 for more solutions that address your specific needs.The comparator presents a quiescent current of 2mA volts.There is a Surface Mount on the board for mounting to a PCB or other board.The device can be run with 5V power supplies.A voltage gain of 100dB can be determined from the voltage formula for the part.With this part, a minimum current of 2.5mA can be supplied.
LM2901MX Features
CMOS, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2mA
Voltage Gain: 100dB
LM2901MX Applications
There are a lot of ROHM Semiconductor LM2901MX linear comparators applications.
- Current and voltage sensing
- System control and monitoring
- Ultra-Low Power Systems
- Battery-Powered Electronics
- Security Detection Systems
- Multivibrators and High-Voltage Digital Logic Gates
- Battery-Powered Electronics
- Window Comparators, Multivibrators
- Automotive
- Pulse, Squarewave, and Time Delay Generators