LM2901D
| Parameters | |
|---|---|
| Factory Lead Time | 25 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Max Power Dissipation | 830mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 2mA |
| Power Dissipation | 830mW |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Propagation Delay | 1.3 μs |
| Quiescent Current | 2.5mA |
| Turn On Delay Time | 1.3 μs |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~32V ±1V~16V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Natural Thermal Resistance | 105 °C/W |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901D Description
The LM2901D device consists of four independent precision voltage comparators, which are designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. These comparators also have a unique characteristic in that the input common-mode voltage range includes the negative rail even though operated from a single power supply voltage.
LM2901D Features
Wide single supply voltage range or dual supplies for all devices: +2 V to +36 V or ±1 V to ±18 V
Very low supply current (1.1 mA) independent of supply voltage (1.4 mW/comparator at +5 V)
Low input bias current: 25 nA typ.
Low input offset current: ±5 nA typ.
Input common-mode voltage range includes negative rail
Low output saturation voltage: 250 mV typ. (IO = 4 mA)
Differential input voltage range equal to the supply voltage
TTL, DTL, ECL, MOS, CMOS compatible outputs
LM2901D Applications
Basic comparator
Driving CMOS
Driving TTL
Low frequency op-amp
Low frequency op-amp with boost
Transducer amplifier
Limit comparator
Crystal controlled oscillator
Time delay generator