LM2576SX-3.3/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Base Part Number | LM2576 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 75 % |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 3A |
| Operating Supply Voltage | 40V |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 5mA |
| Voltage - Output (Min/Fixed) | 3.3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 52kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Nominal Output Voltage | 3.3V |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2576SX-3.3/NOPB Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. There are 5 terminations in this voltage regulator. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHING REGULATOR voltage regulator. In order to save space, this harley voltage regulator is available in the TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package. 1 outputs have been configured in the voltage regulator 12v. On the output pins of this DC DC switching regulator, there is a Fixed output generated. This voltage regulator 12v fits the Surface Mount mounting. Keeping dc to dc voltage regulator's operating temperature at -40°C~125°C TJ is essential when operating. There is a switching frequency of 52kHz for this voltage regulator 12v. A dc to dc voltage regulator's minimum input voltage of 4V is required for this voltage regulator to operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 3.3V. 245 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 12V for the purposes of operation. DC/DC regulators such as this one belong to the LM2576 family of products. The adjusting voltage regulator's output voltage is maintain at 3.3V. There are 5 pins used for switching regulator operation. Voltage regulator's maximal output current reaches 3A A to meet the operation requirements. As a member of the SIMPLE SWITCHER? family of DC/DC regulators, this part is prominent in many specifications. With 40V as the supply voltage, this DC-DC switching regulator will operate. Voltage regulator consumes 5mA A of quiescent current without being affected by outside forces.
LM2576SX-3.3/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 245
5 pins
Operating supply voltage of 40V
LM2576SX-3.3/NOPB Applications
There are a lot of Texas Instruments LM2576SX-3.3/NOPB Voltage Regulators applications.
- Driver circuits
- Scientific research
- Servo drive system
- Telecommunications equipment
- Nuclear power plants
- Automatic plug-in machines
- Wind power
- Boring machines
- Direct power supply system
- Series voltage regulation circuits