LM2576HVS-5.0
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Current Rating | 3A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM2576 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 77 % |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 3A |
| Operating Supply Voltage | 60V |
| Input Voltage-Nom | 12V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 16mA |
| Output Configuration | Positive |
| Quiescent Current | 5mA |
| Input Voltage (Min) | 8V |
| Voltage - Output (Min/Fixed) | 5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 52kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2576HVS-5.0 Overview
This harley voltage regulator utilizes the Tube package for optimized performance. Throughout this voltage regulator, there are 5 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. In order to save space, this harley voltage regulator is available in the TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package. 1 outputs of voltage regulator are configured. On its output pins, this adjusting voltage regulator generates Fixed output. A Surface Mount mounting is required for this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. A DC-DC switching regulator of this type operates at a switching frequency of 52kHz. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 5V. With its peak reflow temperature of 235, this voltage regulator is essentially indestructible. An input voltage of 12V is required for switching regulator operation. DC/DC regulators such as this one belong to the LM2576 family of products. Voltage of voltage regulator can be delivered at 5V volts. During switching regulator operation, 5 pins are used. A maximum output current of 3A A is provided to meet the switching regulator operation requirements. This regulator voltage, belonging to the SIMPLE SWITCHER? family, is a type of DC-DC switching regulator. 60V is the supply voltage for this DC-DC switching regulator. There is no external influence on harley voltage regulator as it consumes 5mA A of quiescent current. In order to ensure reliable performance, the dc to dc voltage regulator's minimum supply voltage is 4V volts. There is a dc to dc voltage regulator's minimum input voltage of 8V allowed by this voltage regulator dc to dc.
LM2576HVS-5.0 Features
1 outputs
Peak reflow temperature (Cel) of 235
5 pins
Operating supply voltage of 60V
LM2576HVS-5.0 Applications
There are a lot of Texas Instruments LM2576HVS-5.0 Voltage Regulators applications.
- Low output voltage switching power supply circuits
- Automation technology
- Terrestrial set-top boxes
- Network technology
- Production lines
- Linear guide
- Boring machines
- Surge protection circuits
- Current source circuits
- Remotely powered electric motors