LM193YDT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM193 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 16mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Screening Level | AEC-Q100 |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM193YDT Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, DTL, ECL, MOS, Open-Collector, TTL output is used here.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparator families.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.It's a typical General Purpose comparator.This is a 2 element comparator.The device is equipped with 8 pins.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -55°C~125°C .The comparator is equipped with 8 pins.In order to find a solution that meets your specific needs, search LM193 for more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 1mA for normal use.5V power supplies are enough to run the device.You are allowed to input a maximum current of 250nA into the device.Based on the voltage formula, the voltage gain of the part is 106.02dB .
LM193YDT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM193YDT Applications
There are a lot of STMicroelectronics LM193YDT linear comparators applications.
- General Purpose Low Voltage Applications
- Window Comparators
- Threshold Detectors
- Point of load regulators
- Pulse, Squarewave, and Time Delay Generators
- Self-diagnostics
- Automatic Test Equipment
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators
- RC Timers